Spitfire System
Configurable and fast extruders by WASP
Extractable cartridgewith a simple turn of screw
The idea behind the new Spitfire System is to simply extract and replace a cartridge (consisting of nozzle, barrel and coupler) with a simple spin of screw, depending on the different printing needs and on the materials you want to print.
The New Spitfire System
The innovative WASP Spitfire System leads to a whole new generation of extruders: the modular architecture allows to mount a specific cartridge and nozzle for what’s your need. Decide what you want to print, we give you the right extruder.
Spitfire takes its name from the famous Second World War airplane. It’s an innovative system, that throught several configurations, allows to reply to the several printing needs.
It’s a guarantee of high quality and sturdy printed pieces, it can be heated up to a 350°C temperature and according to the several needs it can be assembled in 3 different sizes: 0,4; 0,7; 1,2 mm. All the exchange or configuration operations are safe and quick thanks to the Spitfire System.
The cartridge (consisting of nozzle, barrel and coupler) is the heart of the Spitfire System and gives the new WASP extrusion system maximum modularity and versatility. From now on, the extruder can be configurable, depending on the different printing needs.
Two different steel cartridges: Spitfire Core LT (cartridge with teflon) for low temperature prints, Spitfire Core HT (cartridge without teflon) for high temperature prints. To gain long lasting extruders and minimize frictions.
0.4 / 0.7 / 1.2 mm, three nozzle sizes on the same extruder each for a specific need.
NEW RESISTENCE
new resistance can heat the nozzle up to 350°C for printing hardest materials.
EXTRACTABLE CARTRIDGE
Spitfire system is based on the idea of an extractable cartridge composed of barrel + nozzle + coupler, wich is now removable with a simple turn of screw.
HIGH AND LOW TEMPERATURE
Two different cartridge: one for low (LT) and one for high temperature prints (HT), to gain long lasting extruders and minimize frictions
INTERCHANGEABLE NOZZLES
three nozzle sizes on the same extruder each for a specific need.
Decide what you want to print, we give you the right extruder
Spitfire Extruder with Spitfire Core LT (cartridge with teflon) indicated for PLA; PETG and FLEX. Spitfire Extruder with Spitfire Core HT (cartridge without teflon) suggested for ABS; PA; PC; HIPS; PA+C; ASA; PMMA and PP.
Spitfire Red
Spitfire Red Extruder is standard on: DeltaWASP 20 40 Turbo2, DeltaWASP 40 70 Industrial.
Spitfire Black
Version standard on : DeltaWASP 20 40, DeltaWASP 40 70 and Delta WASP 60 100. It can be used on existing models: DeltaWASP 20 40, DeltaWASP 20 40 Turbo, Delta WASP 40 70 and Delta WASP 60 100.