Maximum print volume: Ø 1000 x h1000 mm
Print chamber: open
Minimum layer height: 100 micron
Maximum printing speed: 200 mm/s
Maximum travel speed: 300 mm/s
Acceleration(*): 500 mm/s2
Maximum bed temperature: 120 C°

* All data relative to speed make reference to a Delta WASP 3MT with WASP SPITFIRE RED Extruder

Filament: Ø1.75 with “WASP SPITFIRE RED Extruder”
Pellet: Ø 2-6 with “WASP PELLET Extruder”
Materials: PLA – ABS – PETG – TPU – POLYPROPYLENE

WASP LDM Extruder XL: fluid-dense materials, clay, stoneware, porcelain, earthenware, etc …

WASP SPITFIRE RED Extruder: extruder high-quality fast prints.
Nozzle diameter: 0.4 mm, 0.7 mm, 1.2 mm (filament diameter 1.75 mm)

WASP PELLET Extruder: extruder for plastic pellets optimized for very big prints
Nozzle diameter: 3 mm  (pellet diameter 2-6 mm)

LDM WASP Extruder XL: extruder for dense-fluid materials
Nozzle diameter: 2 mm, 4 mm, 6 mm, 8 mm

Operative systems: Windows, Mac, Linux
Slicing software: compatible with all slicing software (Cura – SLic3r – Simplify3D®)
File type: .stl, .obj, .gcode

SD Card – LCD Screen

Dimensions: 215 cm x 235 cm x 305 cm
Machine weight: 170 kg

Minimum room height for the assembly: 3,6 mt

Packaging for national/international shipping in wood*:
Box A: 310 x 60 x 55 cm
Box B: 227 x 60 x 136 cm

*The machine travels disassembled and it’s assembled in the work space by a WASP certified technician, with obligatory training

Input: 220/240 V 50/60 Hz
Absorbed power:
_Extruder: 600 W max
_Hot pad: 1600 W max

Use: 20-30 C°;
Warehouse: 0-30 C°;

Frame and carter: Aluminum, steel and metal sheet
Printing bed: Rectified aluminum
Movements: low-friction guides on anodized aluminum
Motors: Stepper
Mechanical support of the tool (up to 10 Kg): in case of blackout the falling of the extruder as a safety system counterbalances the extruder weight

RESURRECTION SYSTEM (cc)

A system which allow users to save their print job and resume it in the case of power failure.Read more about Resurrection System

FREE Z-SYSTEM (cc)

The machine measures the height of interruption of the print and it restarts there. Read more about Free Z-System

WASP PELLET EXTRUSION SYSTEM: 3 bins of 7,5 kg of PLA in pellet (tot. 22,5kg)

WASP SPITFIRE EXTRUSION SYSTEM: 2 spools of 1kg (PET-G)

Packaging in wooden box for national/international shipping:
Box A: 310 x 60 x 55 cm
Box B: 227 x 60 x 136 cm

The machine travels disassembled and it’s assembled in the work area. The required height for the room of the assembly is 3,6 mt

Delivered in 8 weeks