Delta WASP 40100 Clay
base price 7.590 €
Accurate and fast using all ceramic materials. Ceramic 3d printer open and accessible on three sides to interact during the prints. With Delta WASP 40100 Clay is possible to print directly on the floor or on a printing surface removable steel. You can also continue printing without waiting for the piece to dry and simply by moving the printer. LDM WASP Extruder XL 3.0 compatible, extruder ideal for fast and large prints.
TECHNICALDETAILS
Printing volume: Ø 400mm x h 1000 mm; (h 450 mm with interim plate)
Minimum layer height: 0,5 mm;
Maximum printing speed: 150 mm/s;
Maximum travel speed: 150 mm/s;
Acceleration: 500 mm/s2;
Material: porcelain, earthenware, gres, refractory materials, clays etc
LDM WASP Extruder: 1.5, 2, 3 mm nozzle diameter (standard)
LDM WASP Extruder XL: 4 mm, 6 mm, 8 mm nozzle diameter
Continuous Feeding System: discover more>>
Manual Feeding Extruder: discover more>>
Operative systems: WIndows, Mac, Linux;
Official Slicing: Simplify3D®
Compatible Slicing: Cura, Slic3r
File type: .stl, .obj, .gcode;
SD Card – Schermo LCD;
Dimensions: 77 cm x 85 cm x h 195 cm (h 270 cm with tank support)
Machine weight: 80 kg
Dimensions for shipping the machine with wooden packaging: 100 cm x 100 cm x 230 cm, weight 130 kg
Input: 220/240 V 50/60 Hz (110 V available);
Absorbed power: 200 W
N.B.: air compressor needed (min. pressure 8 bar)
Use: 20-30 C°;
Warehouse: 0-30 C°;
Frames and carters: metal sheet (lowers the machine vibrations, grants the best print quality), aluminum, painted steel
Print bed: bed in wooden multi-layer
Movements: guides on anodized aluminum
Open sides give the possibility to stop the printer and interact with the part during the print
1 LDM WASP Extruder 3.0 with nozzle in metal diam. 1.5, 2, 3 mm.
1 Tank 5L
1 Printing bed in marine multilayered wood
12,5 kg of red earthenware TECHNICAL DETAILS >>
Delivered in 4 weeks
Note: The air compressor 8baar 50 L and the pipe that connects it to the 3D printer are not supplied by WASP.
A useful tip: It’s a nylon pipe and it’s a tool generally supplied by the air compressor supplier. If you don’t have it you can buy it from any hardware store of the length you need, ask for an 8 mm or 5/16″ (external dimension) nylon pipe.
RESURRECTION SYSTEM
A system which allow users to save their print job and resume it in the case of power failure.Read more about Resurrection System
FREE Z-SYSTEM
The machine measures the height of interruption of the print and it restarts there. Read more about Free Z-System
No stop print: You can move the printer and not remove the object – each time the printing process has finished (this avoids to wait till the object has dried)
Printing or from ground or from 2 printing beds at different Height
Extruder with controlled dosage thanks to a screw (2013)
Controlled air pressure on the printer
Perfect stability thanks to new sliding-system on bearings
Dedicated Firmware
Clay tools
LDM WASPExtruder 3.0
A professional ceramic extruder equipped with a screw system capable of regulating the output flow of the material, allowing a rapid flow interruction and a good retraction control. Ideal for clay mixture and experimental materials.
INNOVATIONS AND FEATURES
Steel screw designed to triple the extrusion flow
Luer Lock adapter
Bubble eliminating extruder, it eliminates air bubbles in the mixture
Extrusion controlling system with retraction option
Outward pressure multiplier
Nozzles Ø 1.5 , 2, 3 mm
LDM WASPExtruder XL 3.0
WASP’s new extruder for fluid deposition modeling, which allows fast, precise, large and hard mixture prints.
INNOVATIONS AND FEATURES
Degassing extruder avoids the formation of air bubbles in the mixture
Extrusion control with the possibility of re-entry
High torque motor for printing hard doughs
Connection tube internal diameter 20 mm
Nozzles 4, 6, 8 mm
ContinuousFeeding System
The world’s first continuous supply system for fluido-dense materials for additive manufacturing that replaces the limited capacity tank with a virtually infinite power system.
ManualFeeding Extruder
LDM (liquid deposition modeling) technology extruder, for 3D printing concrete and geopolymers.
Features
LDM WASP EXTRUDER XLCOMPATIBLE
REMOVABLEINTERMEDIATE PLAN
NEW 32 BITBOARD x4 POWER
FREE ZETASYSTEM (cc)
RESURRECTIONSYSTEM (cc)
HIGHERTEMPERATURE
WIFI MODULE FORREMOTE CONTROL
ADJUSTABLE ZEROPLAYS SCROLL
Ceramic 3D printer
It is possible to print directly on the floor or on a printing surface removable steel, placed 60 cm from the ground. (useful printing volume diameter 400mm x H450 mm). You can also continue printing without waiting for the piece to dry and simply by moving the printer.
Trusted by Leading Companies and Universities
