Build volume: Ø 200 x h 400 mm
Heated active chamber: heated up to 70°C
Minimum layer height: 50 micron
Print speed max(*): 300 mm/s
Travel speed max(*): 500 mm/s
Acceleration(*): 10.000 mm/s2
Bed temperature max: 120 C°
Extruder / Nozzle diameter standard: WASP ZEN X Extruder with MT cartridge, nozzle 0,4 mm

* All data relative to speed make reference to a Delta WASP 2040 INDUSTRIAL X with WASP ZEN X Extruder 0.4 mm.

WASP MATERIALS
Suitable filaments
Ø1.75  with  “WASP ZEN X Extruder”
Ø2.85 with “WASP FLEX Extruder”
ABS WASP
HIPS WASP
PA CARBON WASP
PMMA WASP
TPU *only with WASP FLEX Extruder

OTHER MATERIALS:

PLA
PETG
PC
PC+ABS
PPS
PVA
ASA

TPE *only with WASP FLEX Extruder
PP *only with WASP FLEX Extruder

WASP ZEN X Extruder: dual extruder for single material, multicolor or multimaterial prints, with end filament sensor.
Nozzle diameter: 0.4 mm, 0.7 mm (filament diameter 1.75 mm)

WASP FLEX Extruder: direct drive extruder for flexible materials down to shore 50A.
Nozzle diameter: 0.4 mm (filament diameter 3 mm)

Operative systems: Windows, Mac, Linux

Official Slicing: Simplify3D®

Compatible Slicing: Cura, Slic3r

File type: .stl, .obj, .gcode

Pendrive USB
Wifi network
Display TFT touch

Dimensions: 49 cm  x 44 cm x 87 cm
Machine weight: 38 kg
Dimensions and weight for the packaging on pallet: 50 cm x 70 cm x 114 cm, weight 42 kg

Input: 220/240 V 50/60 Hz (available 110 V);

Absorbed power:
_WASP ZEN X Extruder: 120 W max
_Hot bed: max 1000 W
_Room heater: max 750 W / average 300 W

Use: 20-30 C°;
Warehouse: 0-30 C°;

Frame and cover: aluminum, steel, polycarbonate, PU. All metal body for a stiff and vibration free precise machine
Bed: machined aluminum
Movements: nylon wheels on anodized aluminum sliders PU steel core belts, resistant to high temperature
Insulation: polymer foam for thermo-acoustic insulation
Motors: Stepper

Continuous Print: when the used extruder runs out of filament, the print continues with the other extruder (if correctly loaded)
Bed touch system: automatic system that avoids the collision of the extruder on the plate.
Gcode analyzer: gcode error checking system.
Auto check system: automatic error recognition routine
Mesh auto calibration: mesh plate calibration
Hot and Cold tecnology: heated chamber and cooled mechanics
WIFI: machine connected to the network for monitoring and control
New GUI: new touch interface with bigger TFT display
Camera on-board: for monitoring and timelapse
Remote support: WASP technicians can work remotely on your machine in case of issues

HOT & COLD TECHNOLOGY (cc)
Heated chamber and cooling of the mechanics Read more >>

RESURRECTION SYSTEM (cc)
A system which allow users to save their print job and resume it in the case of power failure. Read more >>

FREE ZETA SYSTEM (cc)
It’s possible to measure at which height the print has interrupted and restart from there. Read more >>

Spool holder

1 kg spool of PLA

Packaging for national/international shipping in cardboard box on pallet: 50 x 70 x 114 cm, weight 42 kg

Delivered in 5 weeks