ZEN EXTRUDER
The fast and clean dual extruder
ZEN Extruder is the solution for a faster and accurate double extrusion 3D print. Featuring the configurable Spitfire system and a totally mechanical basculating switch it just condenses all the best of WASP technology.
ZEN EXTRUDER, all the features of the new double extruder by WASP
MECHANICS – MOTOR FREE
The exchange system between an extruder and the other is mechanically performed without the need for additional servomechanisms through a variable height tilting solution for a faster and more reliable printing.
STOP AND CLEAN FLAPS
The innovative anti-drip flap, when the second extruder is activated, immediately cleans the nozzle that is deactivated without requiring the whole extrusion system to move to the perimeter of the print surface at each extruder change, to allow the dripping of molten material inside the just used nozzle. This innovative solution allows significant time savings during the whole printing process.
SPITFIRE SYSTEM
Each of the two extruders implements the new configurable Spitfire system, giving you the possibilty to set your cartridge and nozzle at the best for every material.
TWO DIFFERENT NOZZLE
Mount different nozzles to print with different resolutions at the same time.
TWO DIFFERENT CARTRIDGES
The two different cartridges allow to print different materials with different temperatures at the same time.
COMPATIBLE PRINTERS
ZEN extruder is compatible with DeltaWASP 40 70 Industrial and DeltaWASP 20 40 Turbo2.
Led by the new generation boards, ZEN Double Extruder can be attributed to materials with different melting temperature or different drop diameters. ZEN Extruder can be adjusted on DeltaWASP 20 40 Turbo2 and DeltaWASP40 70 Industrial.
MOTOR FREE MECHANICS: the switching system is designed totally mechanical to be fasterand more reliable
ZEN EXTRUDER, dual extruder with Spytfire System
Decide what you want to print, we give you the right extruder
ZEN Extruder with ZEN Core LT (cartridge with teflon) prints Pla, Petg e Flex* (* adviced nozzle Ø > 0.7 mm). ZEN Extruder with ZEN Core HT (cartridge without teflon) prints Abs, Pa, HiPs, Asa, Carbonio, Plexiglass, loaded Materials, Polypropylene.
Available on our Shop
Zen Extruder
You can place ZEN Extruder on: DeltaWASP 20 40 Turbo2, DeltaWASP 40 70 Industrial. Zen Extruder is available on our shop in standard configuration with Two 0.4 mm Steel Nozzles and Two ZEN Core LT: steel extractable cartridges with teflon, for low temperature prints.