Recommended settings for CFS

To achieve optimal performance from the Continuous Feeding System (CFS) during ceramic 3D printing, we recommend the following settings:

MIXER: Set the maximum mixer to 3.5. This value controls the maximum speed of the mixer within the system to ensure proper mixing of the material.

EXTRUDER: Set the extruder up to 15. This value adjusts the speed at which the material is extruded through the nozzle. Make sure this setting is in line with the specific needs of the material being used.

IMPORTANT NOTE: If the CFS is connected to the printer, these parameters may be remodulated synchronously with the machine and may not be manually editable.