WASP ZEN X Extruder – nozzle cleaning

Nozzle change is only recommended in the following cases:

• The print appears inconsistent due to a clog.
• It is necessary to change the diameter of the nozzle.

PREPARING FOR REPLACEMENT:

• Turn on the printer.

REMOVING THE EXISTING NOZZLE:

• Bring the extruder to the previously used temperature and wait a few seconds.
• Perform Filament Removal
• Remove the Ooze shield protector
• Using the wrench provided, unscrew and remove the nozzle carefully, being careful of hot surfaces.

NOZZLE REPLACEMENT:

• Screw the new nozzle into its position.
• Reposition the Ooze shield protector

FILAMENT LOADING:

• Perform Filament Loading

POST-REPLACEMENT:

• After replacing the nozzle, you need to perform Self-Calibration